|
|
|
 HALO LAZER TRACK LIGHTING
|
|
|
|
|
 HALO LIGHTING. HALO LINEA LIGHTING,
|
 EASY LOOK UP OF CAN DEMINISION AND SPECS INCLUDING MATING TRIMS. JUST CLICK THE DESIRED CAN-- THAN CLICK MORE INFORMATION TAB FOR ALL AVAILABLE MATING TRIMS.
|
|
|
|
|
|
 SCONCES, ROUNDS,SQUARES, AND DECORATIVE CEILING FIXTURES.
|
|
|
|
|
| | | |
|
|
|
|
|
|
|
|
|
|
|
CAN BE USED AT ANY ELECTRICAL FEED CONNECTION POINT (LIVE, STRAIGHT, L, T OR X) SIZE 5" SQ. SCREWS INCLUDED.
|
|
|
|
|
|
|
TO START A RUN.
|
|
|
|
|
|
|
TO CONNECT TWO TRACK SECTIONS AT ANY ANGLE UP TO 90 DEGREES IN EITHER PLANE OR WALL TO CEILING OR PITCHED CEILING APPLICATIONS.
|
|
|
|
|
|
|
TO CONNECT TWO TRACK SECTIONS END-TO-END. L903 DIFFERS FROM MINI CONNECTOR L908 IN THAT IT PROVIDES A CENTER FEED OPTION AND IS LONGER. MAY BE USED AS FEED POINT.
|
|
|
|
|
|
|
TO CONNECT TWO TRACK SECTIONS AT A RIGHT ANGLE. FIELD ADJUSTABLE FOR EITHER RIGHT HAND OR LEFT HAND APPLICATION. MAY BE USED AS A FEED POINT.
|
|
|
|
|
|
|
TO CONNECT FOUR TRACK SECTIONS INTO A CROSS CONFIGURATION. MA BE USED AS A FEED POINT.
|
|
|
|
|
|
|
L901; L903; L904; L905 OR L906 CONNECTOR ALSO REQUIRED. 4" X 4" X 1 1/8".
|
|
|
|
|
|
|
A LOW PROFILE CONNECTOR TO CLEANLY AND CRISPLY JOIN TWO STRAIGHT TRACK SECTIONS END-TO-END. NOTE: THE L908 IS NOT A FEED POINT.
|
|
|
|
|
|
|
TRACK VAN BE CONNECTED TO EXISTING OUTLET BOX LOCATED ANYWHERE ALONG THE TRACK. COMES WITH CANOPY COVER, CONNECTOR, DEAD-END AND MOUNTING HARDWARE. 4 1/8" X 4 1/4" X 1 3/8".
|
|
|
|
|
|
|
12' THREE WIRE CORD WITH GROUNDED PLUG. MAXIMUM CAPACITY: 10 AMPS.
|
|
|
|
|
|
|
FOR TRACK TO BE WIRED THROUGH STEM (ORDER ONE FOR EACH POINT USED). SHOWN WITH END FEED AND PENDANT STEM KIT-ORDER SEPARATELY.
|
|
|
|
|
|
|
CONSISTING OF ONE LEFT FEED AND ONE RIGHT FEED. TO CONTINUE A RUN AROUND OBSTRUCTIONS. DESIGNED TO ACCEPT 1/2" TRADE SIZE CONDUIT FITTING (NOT INCLUDED).
|
|
|
|
|
|
|
DESIGNED TO ACCEPT STANDARD 1/2" TRADE SIZE CONDUIT FITTING (NOT SUPPLIED). USE WHEN FEEDING TO TRACK THROUGH SURFACE CONDUIT SYSTEM.
|
|
|
|
|
|
|
ALLOWS TRACK TO BE ATTACHED TO INVERTED TEE CEILING. ORDER AS FOLLOWS: 2 KITS FOR 2' TRAC; 2 KITS FOR 4' TRAC; 3 KITS FOR 8' TRAC AND 4 KITS FOR 12' TRACK.
|
|
|
|
|
|
|
TO CONNECT THREE TRACK SECTIONS INTO A T CONFIGURATION. FIELD ADJUSTABLE FOR EITHER RIGHT HAND OR LEFT HAND APPLICATION. MAY BE USED AS A FEED POINT.
|
|
|
|
|
|
|
|
FOR MOUNTING TRAX ON SUSPENDED CEILINGS WITH MINI GRID (9/16" WIDE) SYSTEM
|
|